Part Design
No Grind feature for miters, some holes and saddles
No Grind feature for miters, some holes and saddles and Size-on-Size Holes and Saddles. There are times when the torch cannot cut the exact cut desired because of bevel limitations. These limits are hit in these cases: When a torch is fixed at one ...
Deleting Cut Parts and Designs with Cut Parts
Deleting Cut Parts and Designs with Cut Parts Deleting Cut Parts and Designs with Cut Parts For the operations below you can multi-select items by holding the shift key down to multi-select a range, or holding the ctrl key down to select individual ...
G-Code Programming
G-Code Programming G-Code Programming Contents Overview 1 GCodes Summary Table 2 GCodes In Detail 3 Comments 3 Coordinate System 3 Cutter Compensation 3 Feadrate 3 Leadin 3 Linear Motion 4 Scale 4 Surface Intersection 4 Tabs 5 Torch 5 Torch On/Off 5 ...