Enterprise v4.4 Change List

Enterprise v4.4 Change List

General

New Features

  1. Support for switching between Enterprise Site databases
  2. Systems health check and repair tool
  3. Print Cut Sheets and Burned Metal reports from Nesting, Pipe and Machine Tab
  4. Remote seats and Training program no longer require a CodeMeter Runtime license
  5. Design Parts Tab part details will show cuts instead of scheduled parts
  6. Machine zero point (red band) can be toggled off/on
  7. Documentation updates
  8. Enterprise training added to Support site
  9. Optional – Enabled in System Settings
    1. New multi-themed look and feel
    2. New parts viewer

Changes

  1. CodeMeter Runtime updated to 8.20
  2. Improved display scaling support
  3. Add Open Output Folder button to Machine section of toolbar
  4. Check for updates button added to main About dialog
  5. Cut Off Pipe button relocated to under the new design button
  6. Removed PypeServerAgent service

Fixes

  1. During update check cut integrity can time out and fail to update large databases
  2. Pipes Tab: Parts viewer doesn't clear when clearing all parts using the Clear Pipes button 

Cut Editor

New Features

  1. Parallelogram cuts
  2. Additional measurement parameters for rectangles and ellipses

Changes

  1. Cut Surface column added to Cuts tree

Fixes

  1. Cuts in part design are sorted out of order
  2. Unable to select multiple cuts in the cut editor
  3. Input Editor - Convert from Millimeters tooltip in displays inconsistent messages

Import and Cloud

New Features

  1. Convert double-miter cuts to Y-Trunk and Y-Branch cuts
  2. Create a lookup table from a spreadsheet

Changes

  1. MSuite: Include items as parts for olet element_types fittings marked as “Cut”
  2. PS Connect: Register Reporting Machine and Report Specific Status to PS Cloud
  3. PS Connect: Report heat number to PS Cloud
  4. Stratus: Support for multiple Stratus accounts

Fixes

  1. Branch items create holes in main but leave the Saddle end as a Straight
  2. Filtering Cuts in the Importing queue has no easy way to clear the filter
  3. Lookups are not processed across multiple rules
  4. Miter cuts coming in backwards from SDS2 / PS Cloud
  5. DSTV/NC: Importing G-code cuts with jagged edges
  6. MSuite: Import missing holes
  7. PCF: Pipes from extended TEEs do not inherit the file bore units
  8. PCF: TEE-SET-ON is not processed when intersection settings are set to "Holes"
  9. PS Connect: 4 & 5" nominal pipe sizes are not being converted to NPS on import
  10. STEP: Crown cut does not import correctly
  11. STEP: GCode cut is not adding a Feed Rate to the GCode
  12. STEP: Round radi to 4 decimals when detecting multiple radii to use for end-cuts
  13. STEP: Support more than 2 non-mate edges during surface detection
  14. STEP: User set Step Distance is overwritten by Machine setting
  15. Stratus: Auto-Sync fails
  16. Stratus: Cut Message data not populated in a mapped field

Printing

New Features

  1. Route labels to specified printers based on the part data
    1. Send hot water parts to a printer with red labels
  2. Cut List reports generated for selected parts or pipes
  3. Burned Metal report for selected pipes
  4. Part images generated for each part
    1. Available when new part viewer is enabled
  5. Report Designer for creating and customizing reports

Changes

  1. Support for NiceLabel 2019.3
  2. QR Code size will no longer change size due to data length.

Machine

New Features

  1. Added Torch Process Control G-Code for supported machines/controllers
  2. Added a tool to calibrate machine zero to chuck end. (In Machine Settings)
  3. Added ability on Vernon machine to move torch to the center of a hole before cutting to check/adjust hole alignment.
  4. Improved feedrate control for machines that properly support inverse time feedrates
  5. Improved “Use Pipe Far End” for Vernon machines, using a second NC file for the final part.

Changes

  1. HGG updates and bug fixes
  2. Lone Star Mach3 updates and bug fixes
    1. Improved feedrate calculations
    2. Remove additional same-direction linear steps (which Mach3 does not handle)
  3. Lone Star NUM updates and bug fixes
    1. Improved cut recovery code
  4. Vernon updates and bug fixes
  5. Watts updates and bug fixes

Fixes

  1. Metric machine with leadin creates correct leadin with Imperial part.
  2. Special characters removed for creating Mach3 nc output.

Torch Control/Process

New Features

  1. Added Hypertherm PowerMax 125 cut process control for machines that support process control.
  2. XPR support for Lone Star machines with NUM controllers

Changes

  1. General nesting performance improvements 
  2. Improved "Use Pipe Far End" method for chuck-less machines

Fixes

  1. Numerous Torch Process UI layout and UI fixes

Nesting

New Features

  1. Automatically nest and cut all selected parts on multiple pipes

Changes

  1. General nesting performance improvements 
  2. Improved "Use Pipe Far End" method for chuck-less machines

Fixes

  1. Cuts can be nested in the dead zone per operator overrides
  2. "Nest on New Pipe" nests parts but does not bump/space them
  3. “Use Far End of Pipe” should attempt to put longer pipe in dead area