Enterprise v4.3 Change List

Enterprise v4.3 Change List

General

New Features

  1. CodeMeter updates now run in unattended mode for organizations that manage their software deployments.

Fixes

  1. Change release note links to point to documents on Support Site
  2. Unable to nest part on a new pipe from the Design Tab
  3. The message "Could not connect to SQL database opens full screen without a yes or no option
  4. Error on startup when Machine IP address field is empty
  5. Schedule part child grid's layout is compressed.
  6. Remote seat should not run on an uplevel Enterprise version
  7. Added support for custom SQL account information
  8. Unattended AdminInstall doesn't stop on error when a SQL script fails
  9. At startup and when switching tabs, an additional click is required to get the new tab focused.

Cut Editor

New Features

  1. Add No-Grind functionality to all saddles and circular holes, (not rectangles or ellipses)

Fixes

  1. OD Zero bevel hole of exact same size as Pipe ID can put leadin on the wrong side in edge case
  2. CutDataEntry.CutsTreeViewer cells are no longer editable when they should be
  3. ID holes cannot always offset to the inside edge of the pipe.
  4. From Designer, Nest two scheduled parts on a new pipe feature doesn't work. 
  5. Cut path aberrations while calculating a GCode cut path

Import

New Features

  1. Handle mixed units on PS_JSON Import
  2. New support for Cloudinator->Stratus Cut Lists
  3. Add a "force" option for Default Values 
  4. Export staged parts to Excel
  5. Add "Fitting holes only" option to intersection logic

Fixes

  1. Connect: (Comfort Systems) mapping to a cut template is inconsistent
  2. Connect: Enterprise hanges when a user tries to logs in with a non-existing account username and password
  3. MSuite: Heat # and Cut Status not updating in MSUITE
  4. MSuite: Remove deprecated inch parameter from api calls 
  5. MSuite: Create saddle cuts from fittings
  6. MSuite: User set Include/Exclude Element Types are not used during import
  7. PCF mapping with Pipe Spec to schedule size is no longer working
  8. PMP: Hole X axis orientation mirrored when imported to PypeServer
  9. PMP: Add end-slot cut support
  10. Stratus: Auto-Importing Fails to import parts
  11. Cannot import GCode cuts
  12. Add support for Default Cut Override
  13. Add a custom lookup (Mapping) of part properties with C1/C2 prefixes to end cuts
  14. Scheduled Parts check box in the Importing tab always defaults to checked (true)
  15. Scheduled Parts column should show by default and show scheduled parts count

Label Print

Fixes

  1. Label Deisgner - Cannot add a bar code to a label template
  2. Enterprise does not support NiceLabel 17.3
  3. Heat # is not available for Drop or Pipe Stock Label

Machine

New Features

  1. LoneStar Magnum/Mach3 bringup
  2. Lone Star Num controller work, including XPR control
  3. PythonX SPG NC output (Machine bringup)
  4. Vernon Calibration tool for 5Axis machine
  5. Vernon etching changes/fixes
  6. Watts-Muller machine retrofit capability
  7. Beam Divergence calculations to Kerf Calibration tool

Fixes

  1. Edgeconnect1 cut start percent does not change correctly for fixed pipe holes
  2. EdgeConnect1 gets Cut Sense Lost too easily
  3. EdgeConnect1 improve leadin with an arc
  4. EdgeConnect1/2 Helical cut cannot be made
  5. LoneStar Magnum + ImaTecno head + NUM controller.
  6. Powermax UI had a close button that permanently hides the UI 
  7. Vernon Mini is cutting too short
  8. Watts Machine-Olets are not completing
  9. Step import stalls Watts Machine
  10. For fixed pipe hole cuts, start all leadins at the center of the hole
  11. OD hole with exact side of ID will put leadin on the outside of the hole
  12. Error Creating NC file with Fineline checked

Nesting

Fixes

  1. Preventing cuts in the dead zone is ignored with incremental nesting.
  2. Nest All feature allows holes in the dead zone
  3. Nesting Fails when Enterprise is open at length
  4. When nesting parts, buffer all external status reporting and do not send until "done".
  5. Part window in the nesting tab throws an error when using cut animation tool
  6. Nesting Settings ->bottom training link is not working
  7. Reloading a pipe nesting with parts already OnMachine will change the status of all parts but the first to Nested.  The first/rightmost part will remain OnMachine.
  8. Nesting a skipped cut that is not the first cut, for Watts output, there are two errors
  9. When use far end is selected, nesting allows cuts in the dead zone