Enterprise v4.2 Change List

Enterprise v4.2 Change List

General

New Features

  1. Show left and right cut end notes as individual columns in the Scheduled Parts tab
  2. Allow a remote user to bypass the folder access denied message on app startup
  3. Status Messages button added to status bar for viewing status and errors.

Fixes

  1. Scheduled parts status is not updating until refreshed
  2. The Part Viewing window in the Nesting Tab has a blue circle cursor
  3. Splitters not allowing user to move splitter bars, not resizing correctly, not setting back to default
  4. Display part length as feet and inches in the nesting tab "Part Info"
  5. Editing Secondary torch in torch settings does not apply settings to the selected torch
  6. Scheduled Parts Tab->Export Parts->Save to other file type is empty
  7. Animation is not recognizing a skipped cut
  8. A filter created in the nesting tab shows up in all designs expanded view of scheduled parts
  9. Training Package searches wrong path for content
  10. The Next button in animation view no longer works
  11. Part Viewer is initializing cut paths when neither cut paths nor torch animation is enabled
  12. Deprecate the Auto Print checkbox in the create NC file window
  13. For skipped cuts, remove visual in animation of the lead in/out, and cut path of the skipped cut
  14. Unable to delete a pipe in the Pipes Tab
  15. Enterprise fails to start if first item in listed in the Design tab does not build correctly
  16. Update to CodeMeter 7.6.0
  17. Animation tool in nesting and pipe tab crashes PypeServer
  18. List management dropdown is no longer a dropdown. Users can only manage "Customers" list
  19. Machine and Torch settings Vertical Grids - Allow users to change machines using the scrollbar
  20. PypeServer Enterprise pops to the front/top, interrupting user's work.
  21. The close button next to Auto Fit Columns doesn't close anything

Cut Editor

New Features

  1. Enable Size on Size holes and saddles for Dynamic-Tilt (tilt only) cutters

Fixes

  1. A single hole cut does not show up in display until you create one end-cut
  2. Allow small-beveled holes to fix the pipe
  3. Single Cut display in Designer is not offsetting by Y for any machine.
  4. Change cut order in part editor cut tree failed.
  5. Mirroring a part: Mirroring a miter is not mirroring correctly
  6. Add No-Grind functionality to all saddles and circular holes
  7. A custom category added to the part design grid vanishes after closing the part design window
  8. Design tab grid turns into a big X
  9. Add additional fields to cuts tree table in designer
  10. Unable to group select in the part design grid with checkbox
  11. Duplicating cut tool along Y grid not working
  12. The pierce angle changes direction between a 30° bevel and a 37.5° bevel
  13. For fixed pipe hole cuts, start all lead-ins at the center of the hole
  14.  Negative bevel on a saddle throws an error -- limit bevel to 0 for Saddle.
  15. Saddle and Holes with no-grind feature fails for same size pipe fits for tilts steeper than ~ 30 degrees off 90

Import

New Features

  1. Automatic YTrunk/YBranch cut detection
  2. Delete cuts for staged parts
  3. Importers will use the system cut defaults when setting default values during import
  4. Iso-Viewer integration for visual review of raw imported data

Fixes

  1. Enterprise Intersection Logic to recognize Mitered Pipe on Pipe connections
  2. Field Mapper Editor doesn't persist settings
  3. Intersection settings control doesn't allow certain combinations of saddle/hole cut options
  4. There are two dropdown arrows in Default Values tab
  5. Fixed several issues with imported NC1 files 
  6. MSuite: Support for recent API changes
  7. PCD: Errors parsing files from IsoGen
  8. PCF: Intersection Settings are not importing hole size correctly
  9. PCF: Fixed several ShipConstructor PCF Issues
  10. PS Connect: O-lets have random mate angles.  All should be 90°
  11. PS Connect: 4 & 5" nominal pipe sizes are not being converted to NPS on import
  12. PS Connect: Enterprise hangs when a user logs into PS Connect using a bad account/ password, 
  13. PS Connect: Intersection Settings are being ignored
  14. STEP: GCode cut is not getting a feed rate in the G-Code. 
  15. STEP: Small slit is not being processed
  16. STEP: Import is rotating holes 180° off of what the customer expects.
  17. STEP: Unable to parse some faces for a miter 
  18. STEP: Failing to load settings. Is trying to convert a percentage value through units.
  19. Stratus: (Cutlist) is no longer available in mapping
  20. Stratus: "Normalize diameters" when checked sets some pipe OD to nominal OD size
  21. Stratus: Reset account data after an API key change
  22. Stratus: AutoSync imports into the database and continue to collect in the import grid
  23. Tekla: Add mitre_hole and mitre_saddle support
  24. Tekla: Import with 2 miters incorrect length
  25. Tekla: Not calculating intersections correctly when intersects are not on mate part centerlines
  26. Tekla: Ends rolled incorrectly on import

Label Print

New Features

  1. Allow label designer height and width controls to go less than 1"
  2. Do not automatically print labels for previously cut parts

Fixes

  1. Certain Label Designer Bar Codes are severely cropped
  2. Changing the default printer in the Label Settings is not updating in Print Part Labels
  3. Changing the file name on an exported label template, will not import
  4. Convert Label Templates loop
  5. Fails to parse label template when fields have same starting chars
  6. Importing a label template doesn't give you the option to save
  7. Label Printer selection always reverts to the default printer
  8. Label Template Designer-font size is not dynamically changing
  9. Label template editor doesn't use sample data when test printing
  10. Label Print - Do not display "blank" QR Codes when the source value is null
  11. Moving label template items requires moving mouse cursor outside of item boundaries
  12. NiceLabel template SQL statements are not updated with correct ids
  13. NiceLabelProxy incompatible with NiceLabel 2017
  14. Print Scrap Label workflow prints the assigned part label template instead of the scrap template
  15. Setting Part Label to print after cut erases all the data

Machine

New Features

  1. Auto Scale small cuts using Cut.LeadinDist overrides
  2. Vernon: Create machine calculation tools for end users (pivot height, kerf, and last cut in chuck)
  3. Vernon: Create Calibration tool for Vernon 5Axis machine  

Fixes

  1. Hole cut X-rotate stall
  2. Tilt-down-pipe only torch paths not smooth on rectangles. 
  3. When loading to machine warn user if torch processes are already assigned to Pipe/Parts/Cuts
  4. Edge Connect: cuts creating a slit with zero bevel start that has a starting bevel of ~2 degrees.  
  5. Edge Connect: Create small hole straight in lead-ins
  6. Edge Connect: Add support for Tabs
  7. Edge Connect: Add support for cuts with bevels and lead-in off
  8. Edge Connect: Not winding 360 correctly
  9. Edge Connect: Lead-in does not scale for small holes
  10. Edge Connect 1: Cut start percent does not change correctly for fixed pipe holes 
  11. Edge Connect 1: Improve leadiin with an arc
  12. Edge Connect 1: Gets Cut Sense Lost too easily
  13. Edge Connect 1: does not do lead-out
  14. Edge Connect 1,2: Add Pause before and after cut
  15. Edge Connect 1,2: Improve logic for Fixed pipe cuts, add ability in cut to control fixed pipe
  16. Fineline: Add stop for code to stop for user to set the torch type (Cut or etch)
  17. Fineline: Process selector (possibly XPR also) is not initializing correctly on second part
  18. Fineline: Filtering is not filtering correctly in Process Selector
  19. Fineline: Add torch override to ignore cut height
  20. Finline/XPR: Add process checks for material and wall thickness match before loading
  21. Freitag: Bring up baseline work
  22. Lone Star Magnum:  Bringup with Slider Tilt head
  23. Vernon: Torch Settings Dwell time setting is not updated when set in the dialog box.  
  24. Vernon: Fixed several torch bugs 
  25. Vernon: 5 axis machine configured in Imperial and writing Metric .nc files, is not outputting Z height in metric to the NC files
  26. Vernon: 5 axis & Dynamic Tilt Torch Settings - Tip Geometry tab is hiding numeric input
  27. Vernon: 5 axis output is not using/responding to MachineProperty.AdjustSpeedByStepCount
  28. Vernon Mini: Limit machine auto-wind to not exceed max
  29. Watts Machine: A hole size of .750 causes a loading issue when set to ID

Nesting

Fixes

  1. Nesting Fails when Enterprise is open at length
  2. Buffer all external status reporting and do not send until "done".
  3. Part viewing window throws an error when attempting to use the animation tool
  4. The catch for preventing cuts in the dead zone is ignored with incremental nesting